Publicité
Les langues disponibles
Les langues disponibles
3.
Pull the film leader out to the red index mark.
Hold the film cartridge and ensure film is properly positioned with no
slack.
4.
Close the camera back, and check that the film
has been correctly loaded.
Lite Touch Zoom 100ED
Once the camera back is closed, the film automatically advances to the
first frame. Until film loading is complete, "
panel.
When the film has been properly set, " " is displayed on the LCD panel.
If the letter " " blinks on the LCD panel, film is not properly installed.
Open the camera back again and reload film.
Lite Touch Zoom 100ED QD
" blinks on the LCD
Preparations
E
15
Publicité
