Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION – PRODUCT OPERATION
Only qualified personnel authorised by the manufacturer should perform the installation of the welding equipment. During the installation, the
operator must ensure that the machine is disconnected from the mains. Connecting generators in serial or in parallel is forbidden.
EQUIPMENT DESCRIPTION (FIG-1)
This machine is designed to carry out the car body repair operations described below :
- spot welding on sheets using a pneumatic clamp,
- welding of sheets using a gun,
- welding of nails, rivets, washers, studs, mouldings,
- repair of bumps and impacts (hail impacts with the pliers option).
1-
SD card reader
2-
Interface (MMI)
3-
Cooling unit
4-
Overhanging arm locking support
5-
Regulator
DESCRIPTION OF THE G CLAMP (FIG-2)
1-
Arm locking/unlocking lever
2-
Interchangeable arm
3-
Gyroscope
4-
Pneumatic body
5-
Over-opening electrode
6-
Side handle
Clamp opening : push the button (FIG 2 - 10), the opening of the clamp can be released. The electrode retracts in the clamp leaving a space of
80 mm to access the welding area instead of 20 mm when not in use.
ACCESSORIES AND OPTIONS
Coolant
5 l : 062511
10 l : 052246
Welding test case
050433
BMW C7502655 - GYSPOT PTI GENIUS
Protective cover
077126
Anti-corrosion
welding primer 500ml
076822
6-
Power-on circuit breaker
7-
Power cord
8-
Filling cap
9-
Cooling liquid gauge
7-
Locking latch
8-
Gyro lock/unlock mechanism
9-
Over-opening button
10-
Spot welding button
11-
Remote settings button
12-
Stem height control lever
SD card including automatic
programs INCLUDED
050914
BMW - 6 CAPS TYPE A-32 -
Kit renove wifi
070691
EN
Pressure sensor
052314
Ø 16mm
085664
43
Publicité
