Télécharger Imprimer la page

LD Systems AMP 405 Manuel D'utilisation page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
This symbol indicates hazards that can cause electric shock.
This symbol indicates hazardous areas or hazardous situations.
This symbol indicates hazards caused by hot surfaces.
This symbol indicates hazards due to high volume levels.
This symbol indicates additional information on the operation of the product.
This symbol denotes a device that does not contain any user-serviceable parts.
This symbol indicates a device that may only be used in dry rooms.
SAFETY INSTRUCTIONS
DANGER:
1. Do not open the device, and do not make any modifications to it.
2. If your device no longer functions properly, if liquids or objects get inside it, or if
it has been damaged in any other way, switch it off immediately and disconnect
it from the power supply. This device may be repaired only by authorised repair
technicians.
3. For devices of protection class 1, the protective conductor must be connected
correctly. Never disconnect the protective conductor. Devices of protection class 2
do not have a protective conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device may not be operated if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the mains cable of the device is damaged, do not operate the device.
4. Permanently attached mains cables may only be replaced by a qualified person.
4

Publicité

loading

Ce manuel est également adapté pour:

Ldamp405