LD Systems AMP 405 Manuel D'utilisation page 17

Item number
Max. gain
Protection
Third-party control
Remote standby
Remote standby connector
Power supply
Type
Voltage range
Mains fuse
Secondary voltage
Secondary current
Secondary connector
Primary connector
Safety class
Max. power consumption
Idle power consumption
Standby power consumption
Mains inrush current
Operating temperature
Max. humidity in operation
(non-condensing)
General
Time to auto standby
Standby wake-up time
Standby wake-up threshold
Material
Dimensions (W x H x D)
Weight
Included accessories
LDAMP405
22 dB
Over-/undervoltage, overtemperature, short circuit, DC detection
GPI port for external momentary buttons
2-pin black terminal block, 3.5 mm pitch
External SMPS
100 V AC–240 V AC (±10%), 50–60 Hz
None
24 V DC
5 A
2-pin terminal block (5.08 mm pitch)
IEC jack
Class 3
230 W (sine 1 kHz with 4 x 4 ohm load)
7.5 W (no signal input)
<1 W
2 A @ 230 V AC
0°C–40°C
85%
20 min.
3 seconds
-40 dBu
Steel chassis, plastic front panel
142 (W) x 53 (H) x 222 (D) mm (height with rubber feet)
1.2 kg
External power supply, mounting plates for surface mount applications,
terminal blocks for electrical connections.
17