Publicité
Les langues disponibles
Les langues disponibles
UNDER-TABLE/TABLETOP MOUNTING
There are two recesses on the top and bottom of the housing, each with two M3 threaded holes,
for under-table/tabletop mounting. Attach the two included mounting plates to the top or
bottom using the included M3 countersunk screws. Now the amplifier can be mounted in the
desired position (see illustration, mounting screws not included). For tabletop mounting, the four
rubber feet must be removed beforehand.
CARE, MAINTENANCE, AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, serviced. The care and maintenance required depends on the intensity of use
and the environment in which it is used.
We recommend a visual inspection before each operation. Furthermore, we recommend carrying
out all the applicable maintenance measures specified below once every 500 operating hours
or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may be
limited should defects result from inadequate service and maintenance.
CARE (CARRIED OUT BY USER)
WARNING! Before carrying out any maintenance work, the power supply and, if possib-
le, all device connections must be unplugged.
PLEASE NOTE! Improper care can lead to impairment of the device or even destruction.
1. Housing surfaces must be cleaned with a clean, damp cloth.
Make sure that no moisture can penetrate the device.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make
sure that damage to the device is prevented (for example, fans must be blocked in this case).
14
Publicité
