Publicité
Les langues disponibles
Les langues disponibles
The product is not working at temperatures below 0 °C and above
+45 °C due to its battery protection.
Note: Fully charged the battery before storage. If you want to store the
product for longer than 3 months, fully charged the battery every 3 months.
Use
Note: Fully charge the product as described in chapter "Charging the
product".
Attach the inspection light
handle
of the product as shown in figure C/figure F.
5
Press the ON/OFF button
You can attach the product to a flat, ferromagnetic surface using the
magnetic foot
Note: Be aware of the weight of the product.
You can operate the product in 3 different modes. Select them by
repeatedly pressing the ON/OFF button
ON/OFF button/modes:
1x press
2x press
3x press
4x press
CAUTION! Do not pull the inspection light
flash light
13
as this may damage them. Instead, turn the corresponding light out of
the accessory socket
12 GB/IE/NI
/flashlight
8
2
(see fig. D).
1
directly out of the accessory socket
and then pull it off the handle
4
/workshop light
13
to switch on the light.
.
2
100 % luminosity
50 % luminosity
SOS
switch off light
8
to the
11
/workshop light
on the handle
5
(see fig. E).
5
/
11
,
4
Publicité
