Before use
Charging the product
Note: Remove all packaging materials from the product.
Note: The product must be connected to an AC adapter or to a computer.
The technical data of these devices (not included in the scope of delivery)
must be observed.
Note: In order to use the product without a USB cable
recharge the rechargeable battery before use. The charging process
takes about 4 to 5 hours. The rechargeable battery is firmly integrated
into the product.
Note: Charge the product for approx. 12 hours prior to first use.
Open the protective cap and connect the USB cable
computer or with the USB connector of a power adapter.
Connect the type-C-USB connector on the USB cable
type-C-USB input socket
Plug the power adapter into a socket.
Note: The battery charging status is shown by the charging indicator
1 LED lights up = 25 %*
2 LEDs light up = 50 %*
3 LEDs light up = 75 %*
4 LEDs light up = 100 %*
* This is the approximate percentage of battery capacity but not actual
measurement.
The charging time is approximately 4–5 hours when the battery was
drained.
Disconnect the USB cable
discharging themselves.
Close the protective cap before you start to use the product again.
on the product.
6
from the product to prevent the batteries
14
, you need to
14
with a
14
to the
14
3
GB/IE/NI
11
: