IMPORTANT
• If your crib does not have a solid, stationary, completely flat, firm
surface including a spring or slat base, place a hardboard between
the crib base and the Sensor Pad, to ensure correct operation. The
hardboard support must measure at least 30 x 30 cm (12" x 12")
and 6 mm (1/4") thick. This hardboard support must be larger than
the Sensor Pad surface area
• The Sensor Pad functions with standard crib sprung and foam
mattresses and not memory foam (partial or full), hollow frame
construction mattresses and water beds. Please consult Angelcare if
unsure of mattress compatibility. The hardboard maintains a constant
pressure on the Sensor Pad, enabling it to detect the baby's movements
even when the baby is at the edges of the crib
3- SETTING UP THE NURSERY UNIT
Sensor Pad
WALL-MOUNTED
1
TABLETOP
1
6
CFO2_ANGE_Manuel_AC527_NA_Complet.indd 6
Place the Nursery
Unit and Adapter cord at
least 3 feet (1 meter)
from the crib
2
Wall-Mounted
1
Tabletop
2
3
4
2
19-02-06 12:44