Publicité
Les langues disponibles
Les langues disponibles
D
C
A
Transportation / Storage
Disconnect the Airflo compressor from the
inflation.
Ensure that the
Surfer Bather
before storage may result in a build-up of mould on the surface of the product leading to a weakening
Bather
of the fabric and consequential invalidation of the product warranty. Store in a dry environment.
To maintain the Airflo battery when being stored for long periods, put the Airflo on charge overnight every
3 months.
Disposal / Recycling
When the
Surfer Bather
recycling centre (civic amenity site).
When the Airflo has reached the end of it's working life, remove the batteries for safe disposal in
accordance with your local council guidelines, and dispose of the Airflo at your local household waste
recycling centre (civic amenity site).
E
B
F
Surfer Bather
is clean and thoroughly dry before storing. Failure to thoroughly dry the
has reached the end of its working life, dispose of it at your local household waste
Re-fitting the Netting to the Backrest Frame after
laundering
•
Insert the thigh support foam (A fig.10) in the netting
lower pocket.
•
Insert the backrest frame into the pocket of the
netting (B) and fasten the four buckles (C).
•
Tighten or slacken the buckle straps in order to adjust
the tension of the netting on the backrest frame.
•
Insert the headrest foam (D) in the pocket of
the headrest netting and if required, Velcro ® the
headrest to the backrest.
The chest strap (E) can be attached to the Velcro ®
•
panel (F) as required.
10
before transporting so as to avoid accidental
Surfer
SURFER BATHER
ENGLISH
9
Publicité
