Publicité
Les langues disponibles
Les langues disponibles
Fitting/Adjustment of Backrest and Platform Pad
•
The backrest and the platform pad are secured to
the platform by means of plastic lugs inserted into
keyhole slots. Locate and slide the lug into the slot
as indicated (1 & 2 fig. 1), press the locking tag
down so that it 'clicks' into place (3 fig. 1).
NOTE: The rear lugs on the platform pad do not
have locking tags.
•
Fit the backrest hinges to the slots (A fig.2).
•
Adjust the backrest angle by locating the support
bar in any of the three catches
1). The backrest can be fully lowered by releasing
the support bar from the catches and allowing the
backrest to lie flat.
•
Adjust the backrest angle to the required position
and connect the buckle on the backrest restraint
strap (C fig. 3). Tension the strap in order to lock the
backrest angle. If the backrest angle needs to be
changed, unfasten the buckle before resetting the
angle. Re-connect the buckle and tighten the strap
to lock the backrest at its new angle.
•
Fit the platform pad (D fig. 1) by simultaneously
inserting the plastic lugs into the slots (E & F fig. 2).
NOTE: The rear lugs on the platform pad do not have
locking tags.
To unfasten the plastic lugs in order to remove the
backrest and platform pad:-
•
Locate the locking tag from the underside of the
platform and press it up (1 fig. 4).
Slide and lift the lug clear of the slot (2 & 3 fig. 4).
•
SURFER BATHER
ENGLISH
6
D
1
(B fig.
1
E
2
3
2
1
4
A
B
3
2
A
F
C
3
Publicité
