DAB DTRON2 45/90 Instructions Pour L'installation Et La Maintenance page 14

The power supply cable and the float switch must never be used to carry or lift the pump. Always use the pump handle.
Use is allowed only if the electric system is in possession of safety precautions in accordance with the regulations in force in the
country where the product is installed (for Italy CEI64/2).
Never pull on the cable to detach the plug from the socket.
If the power cable is damaged, it must be replaced by the manufacturer or by their authorised technical assistance service, so as
to avoid any risk.
Failure to observe the warnings may create situations of risk for persons or property and will void the product guarantee.
Particular warnings
Always switch off the mains power supply before working on the electrical or mechanical part of the system. Only firmly
cabled mains connections are admissible. The appliance must be earthed (IEC 536 class 1, NEC and other applicable
standards).
Mains terminals and motor terminals may still have dangerous voltage when the motor is stopped.
The appliance may only be used for the functions for which it was designed.
Under certain calibration conditions, the converter can start automatically after a power failure.
The Manufacturer does not vouch for correct operation of the electropumps or answer for any damage that they may cause if they
have been tampered with, modified and/or run outside the recommended work range or in contrast with other indications given in this
manual.
The Manufacturer declines all responsibility for possible errors in this instructions manual, if due to misprints or errors in copying. The
Manufacturer reserves the right to make any modifications to the products that it may consider necessary or useful, without affecting their
essential characteristics.
1 GENERAL
1.1 Applications
Multistage submerged pump with integrated electronics, ideal for use in rainwater systems and irrigation networks, for pumping water from
tanks, cisterns, wells, lakes and for other domestic applications requiring high pressure.
Thanks to their compact and handy shape, they are also used for particular applications as portable pumps for emergency situations such as for
drawing water from tanks or rivers, draining swimming pools and fountains. Also suitable for gardening and general hobby activity.
The electronics automatically control starting and stopping (ON/OFF) of the application depending on the request for water by the user.
The ideal working situation is with the pump completely submerged; however, the motor cooling system allows its use up to the minimum
suction height (110 mm).
ENGLISH
RESPONSIBILITY
9