Ivoclar Vivadent IvoBase Injector Mode D'emploi page 5

3. Carrying out the injection process
i
Step 1:
Select the desired program with the program number keys.
Step 2:
Open the safety door.
IvoBase
Injector
Step 3:
Slide the flask into the holder intended for this purpose as shown in the picture.
Step 4:
Close the safety door. A program cannot be started if the safety door is open.
Press the Start key to start the program.
Step 5:
At the end of the program, an acoustic signal sounds. Remove the flask and start
the divestment, as described in the Instructions for Use of the material.
Always use the thermal glove supplied when removing
the flask from the Injector!
P P P P
2 3
1
...
STOP
START
IvoBase
Injector
RMR
– +
ENTER ESC
P P P P
2 3
1
...
STOP
START
IvoBase
Injector
1.
2.
3.
4.
5.