Publicité
Les langues disponibles
Les langues disponibles
˜ Ionization mode
(Fig. B)
/
[
4 ]
(Ion switch)
˜ Styling hair
Using the concentrator nozzle
1. Put the concentrator nozzle
.
[
10 ]
2. Rotate the concentrator nozzle
position.
3. Switch on the product. Use the concentrator
nozzle
to direct the air flow onto a specific
11 ]
[
section of the hair.
m
CAUTION! Do not touch and remove the
concentrator nozzle
Cooling mode
9 ]
[
Press and hold
button
Release button
NOTES:
The cooling function (
the heat level is set to "no heat" (
When the product fails to function, switch off and
disconnect the product from power. Let the product
to cool.
˜ Cleaning and maintenance
m
DANGER! Risk of electric shock! Always
switch off the product and disconnect the power
plug
from the electrical outlet before cleaning
6 ]
[
the product.
m
WARNING! Do not immerse the product's
electrical components in water or other liquids.
Never hold the product under running water.
m
CAUTION! Do not use corrosive or abrasive
cleaning agents or material to clean the product.
Ionization
Ionization
indicator
Off
Off
On
On
on the air outlet
11 ]
[
to change the
11 ]
[
when it is still hot.
11 ]
[
Cool air flow
On
Off
) does not work when
9 ]
[
) .
8 ]
[
˜ Cleaning the housing and the
concentrator nozzle
1. Remove the concentrator nozzle
outlet
.
[
10 ]
1 ]
[
2. Wipe the housing and the concentrator nozzle
with a slightly damp cloth. For stubborn soiling,
wipe with a light detergent on the cloth. And dry
all parts thoroughly.
˜ Cleaning the protection grid and
the air inlet
1. Remove the protection grid
air inlet
(Fig. C).
[
2 ]
2. Clean the protection grid
with a dry cloth.
3. Attach the protection grid
air inlet
.
[
2 ]
˜ Storage
Store the product at a cool, dry place, protected
from moisture and out of the reach of children.
˜ Disposal
The packaging is made of environmentally friendly
materials, which may be disposed of through your
local recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite materials.
Product:
The product incl. accessories, manual and packaging
materials are recyclable and are subject to extended
producer responsibility.
Dispose them separately, following the illustrated Info-
tri (sorting information), for better waste treatment.
The Triman logo is valid in France only.
from the air
11 ]
[
[
11 ]
from the
3 ]
[
and the air inlet
3 ]
[
2 ]
[
back onto the
[
3 ]
GB/IE
19
Publicité
