SilverCrest SHTD 2200 E4 Guide De Démarrage Rapide page 18

In case of malfunction, repairs
are to be conducted by qualified
personnel only.
m WARNING! Risk of electric
shock! Do not immerse the
product in water or other liquids.
Never hold the product under
running water.
m WARNING! Risk of electric
shock! Never use a damaged
product. Disconnect the product
from the power supply and
contact your retailer if it is
damaged.
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label.
Regularly check the power plug
and the power cord for damages.
If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard.
Protect the power cord against
damages. Do not let it hang over
sharp edges, do not squeeze or
bend it. Keep the power cord
away from hot surfaces and open
flames.
For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable in
the electrical circuit supplying the
bathroom. Ask your installer for
advice.
The use of extension cords is not
recommended. If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A. Lay cords
in such a way that they may not
be tripped over or otherwise
damaged.
m WARNING! Risk of electric
shock! Do not use this product
near bathtubs, showers, basins or
other vessels containing water.
GB/IE 17