Burda BRELD2200 Notice D'utilisation Et D'entretien page 11

I :
NSTALLATION DETAILS
1. Drill four holes in the wall as shown below.
2. Fix the two supports to the wallt using
dowels of appropriate size. The dowels should
be able to hold at least 5 times the radiant
heater.
3. Make sure that the wall to which the device
is supposed to be attached is stable and there
are no power lines or water pipes.
All manuals and user guides at all-guides.com
The heater must not be
directed towards the
ceiling or flammable
materials.
The device must not be
mounted into the ceiling.
You must leave enough
space around the top of
the unit to ensure good
ventilation.
After the heater has been
switched on, wait 15-20
minutes for the heater to
reach the maximum
temperature.
The ideal mounting
position is directly above
the area to be heated with
a longitudinal orientation
and directed vertically
downwards.
Insert the arch shaped
support in the special rail
on the upper side of the
device.
Align the holes of the
supports and join them
together using the
supplied bolts, setting the
desired inclination.
The support to be fixed
to the wall presents a
series
of holes that allow
to fix the heater in
different positions.