Samsung DW60 8 Serie Manuel D'utilisation page 19

STEP 7 Install the custom panel
Bespoke models
DD68-00271C-01_IB_DW8700B_EN.indd 19 DD68-00271C-01_IB_DW8700B_EN.indd 19
1. Open the door and fit the custom panel
in the front bottom of the door.
Make sure that the ribs of the panel fit
into the corresponding holes (totaling 6)
of the door.
2. While holding the door and the custom
panel with both hands, press the panel
evenly from bottom to top to lock into
the dishwasher.
3. When both sides of the panel lock into
place, press the top centre of the custom
panel to secure it to the top of the door.
NOTE
• Make sure that the custom panel fits in
the dishwasher properly.
• If the gap between the dishwasher and
the custom panel is below 2 mm, proper
installation is done. For 2 mm or more,
remove the custom panel and try again.
English 19
2024-07-16( ) 2024-07-16( ) 2:58:56 2:58:56