Publicité
Les langues disponibles
Les langues disponibles
WARNING
Do not install the dishwasher on a poorly
supported structure.
• Make sure the dishwasher is level using
the height adjustable feet.
• When leveling is complete, check if the
door opens and closes properly.
Ambient temperature
Do not install the dishwasher in an area
exposed to freezing temperatures. The
dishwasher always retains some water in
the water valve, pump, and hose. If the
water freezes in the dishwasher or hoses,
it may damage the dishwasher and its
components.
Test run
After installing the dishwasher, run the
Express cycle to make sure the dishwasher
is installed correctly.
DD68-00271C-01_IB_DW8700B_EN.indd 13
DD68-00271C-01_IB_DW8700B_EN.indd 13
Final check
1. Remove all foam, paper packaging,
and unnecessary parts from inside the
dishwasher.
2. Turn the power circuit breaker on.
3. Open the water supply valve to supply
water to the dishwasher.
4. Plug in and turn the dishwasher on.
Then, select and run the Express cycle.
5. Check if the dishwasher turns on
normally and if there are any water
leaks while the dishwasher is operating.
Make sure to check for water leaks on
both ends of the water line and the
drain hose connector.
English
13
2024-07-16( )
2024-07-16( )
2:58:53
2:58:53
Publicité
