ResMed AirFit F30i Mode D'emploi page 8

WARNING
•
The mask is not intended to be used simultaneously with
nebulizer medications that are in the air path of the mask/tube.
•
If there is any visible deterioration of a mask component
(cracking, crazing, tears etc.) the component should be discarded
and replaced.
•
Always follow cleaning instructions and only use a mild liquid
detergent. Some cleaning products may damage the mask, its
parts and their function, or leave harmful residual vapours. Do not
use a dish washer or washing machine to clean the mask. Ozone
or UV light products have not been validated for use with the
mask and may lead to discoloration or damage.
CAUTION
•
When fitting the mask, do not overtighten the headgear as this
may lead to skin redness or sores around the mask cushion.
•
As with all masks, some rebreathing may occur at low pressures.
•
Using a mask may cause tooth, gum or jaw soreness or aggravate
an existing dental condition. If symptoms occur, consult your
physician or dentist.
•
Do not iron the headgear as the material is heat sensitive and will
be damaged.
Technical specifications
Mask setting options: For AirSense™, AirCurve™ or S9™: Select 'Full Face'.
Compatible devices: For a full list of compatible devices for this mask, see the
Mask/Device Compatibility List at ResMed.com/downloads/masks. SmartStop may not
operate effectively when using this mask with some CPAP or bi-level devices.
Pressure-flow curve
Pressure
Flow
(cm H O) (L/min)
2
4 22
11 38
17 48
24 59
30 67
English 7