ResMed AirFit F30i Mode D'emploi page 2

ENGLISH
Thank you for choosing the AirFit
mask uses a cushion that seals under the nose and around the mouth,
and a frame with a tube connection above the head. To breathe fresh air,
this mask features vent holes in the cushion and elbow, and valves in the
frame.
A Elbow
B Frame
C Cushion
D Headgear
1 Vent holes (cushion)
2 Vent holes (elbow)
3 Side button
Intended Use
The AirFit F30i Non Magnetic mask has two product variants:
•
The AirFit F30i Non Magnetic variant is intended for single-patient
reuse in the home environment.
•
The AirFit F30i Non Magnetic SLM (Sleep Lab Mask) variant is
intended for multi-patient reuse in the hospital/institutional
environment.
™
F30i Non Magnetic full face mask. This
4 Elbow ring
5
Anti-Asphyxia valve (inside the
left and right of frame
connector)
6 Frame connector
7 Mask clip
8 Lower headgear strap
9 Upper headgear strap
English 1