Safety Function - Energetics PR 1000 p Manuel D'assemblage

6
RANGE OF PROGRAMS
Speed (km/h)
Time (min : sec)
Distance (km)
Calories
HEART RATE FUNCTION
Place your palms on the hand pulse and the pulse will be shown in the pulse window after 5 seconds. The heart rate is
for reference only and not for medical purpose.

SAFETY FUNCTION

If at any stage you require the treadmill to stop, pull the safety cord from the treadmill and it will cut power to the unit
immediately. The window will display "-- --" and the buzzer will make a 15 times "bi" sound. Attach the safety key again
and you can adjust the weight which is displayed in the window.
POWER SAVE FUNCTION
Without any operation for ten minutes the unit will begin to hibernate, and the display will dim. Press any button to
wake up the display.
CAUTION
1. We recommend that you maintain a slow speed at the beginning of a session and hold on to the handrails until you
become comfortable and familiar with the treadmill.
2. Attach the magnet end of the safety pulling rope to the computer and also attach the clip of the safety pulling rope
to your clothing.
3. To end your workout safely, press the STOP button or pull out the safety cord, then the treadmill will stop
immediately.
Mode Default Program Default
– –
30:00 30:00
1.00 km –
50 kcl –
Setting range Displayed range
– 0.8 km/h – 12 km/h
5:00 – 99:00 0:00 – 99:59
0.5 km – 99.5 km 0.00 km – 99.9 km
10 kcl – 995 kcl 0 kcl – 999 kcl