Publicité
Les langues disponibles
Les langues disponibles
Enlarging one part of the screen
(POINT ZOOM)
This Plasma Display allows enlarging of the screen image.
When enlarging the screen, the 5/∞/2/3 buttons can be
used to move the enlarged viewing area around the
screen.
÷ The range of zoom possible can be confirmed by viewing
the Zoom-Area subscreen at the upper right of the main
screen (A "+" mark will be displayed in the center). The
Zoom-Area subscreen is displayed for about three
seconds whenever the POINT ZOOM button, one of the
5/∞/2/3 buttons, or DISPLAY button is pressed.
MENU
1
Press the remote control unit's POINT ZOOM
button.
66.0
24
All manuals and user guides at all-guides.com
DISPLAY
POINT
ZOOM
5/∞/2/3
SET
R12
Zoom-Area subscreen
Each time the POINT ZOOM button is pressed, the
zoom ratio alternates in the following order:
3 LEVEL1
LEVEL4 2
÷ LEVEL1 .......... x1
÷ LEVEL2 .......... x1.5
÷ LEVEL3 .......... x2
÷ LEVEL4 .......... x3
2
Using the 5/∞/2/3 buttons, move the screen to
the desired part of the image.
R12
24
Notes
¶ During use of the POINT ZOOM function, the screen size
cannot be changed.
¶ When using the Plasma Display in a profit-making activity, or
when exhibiting images publicly, using the screen size function
to compress or stretch the image may result in infringement of
the copyrights of the image owners.
¶ Pressing the POINT ZOOM and 5/∞/2/3 buttons again will
change the zoom ratio and the position of screen enlarged.
¶ If the input signal changes, or if the menu screen is displayed
and the input is changed, or if the multiscreen mode is
selected, the POINT ZOOM function will be canceled.
Operation
3 LEVEL2
LEVEL3 2
21
En
Publicité
