Publicité
Les langues disponibles
Les langues disponibles
IN
OUT
COMBINATION
1
3
AUDIO (OUTPUT) (Stereo mini jack)
Use to output the audio of the selected source
component connected to this unit to an AV amplifier
or similar component.
Note: No sound is produced from the AUDIO (OUTPUT) jack
when the MAIN POWER switch is set to OFF or ON (standby)
(page 13).
4
AUDIO (INPUT1) (Stereo mini jack)
Use to obtain sound when INPUT1 is selected.
Connect the audio output jack of components
connected to INPUT1 to this unit (page 13).
5
AUDIO (INPUT2) (Stereo mini jack)
Use to obtain sound when INPUT2 is selected.
Connect the audio output jack of components
connected to INPUT2 to this unit (page 13).
6
ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin)
Use the ANALOG RGB OUT (INPUT1) terminal to
output the video signal to an external monitor or other
component.
Note: The video signal will not be output from the ANALOG
RGB OUT (INPUT1) terminal when the main power of this
unit is off or in standby mode.(page 12)
7
ANALOG RGB IN (INPUT1) (mini D-sub 15 pin)
For connection of a personal computer (PC) or similar
component. Make sure that the connection made
corresponds to the format of the signal output from
the connected component (page 12).
All manuals and user guides at all-guides.com
RS-232C
2
Part Names and Functions
9
0
OUTPUT
INPUT1
INPUT2
INPUT1
ANALOG RGB OUT
ANALOG RGB IN
(D-Sub)
(D-Sub)
AUDIO
AUDIO AUDIO
3
45
6
7
8
DIGITAL RGB (INPUT2) (DVI-D jack)
Use to connect a computer.
Note: This unit does not support the display of
copyguard-protected video signals (page 12).
9
SPEAKER (R) terminal
For connection of an external right speaker.
Connect a speaker that has an impedance of 6 Ω
(page 13).
0
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 6 Ω (page 13).
-
AC IN
Use to connect the supplied power cord to an AC
outlet (page 14).
=
MAIN POWER switch
Use to switch the main power of the unit on and off.
-
=
INPUT2
DIGITAL RGB
(DVI-D)
8
9
En
Publicité
