Morgan Olson C250 Guide De L'opérateur page 8

Instrument Cluster Display
USING THE INSTRUMENT CLUSTER
DISPLAY CONTROLS
Driving while distracted can result in
loss of vehicle control, crash and injury. We strongly
recommend that you use extreme caution when using
any device that may take your focus off the road. Your
primary responsibility is the safe operation of your
vehicle. We recommend against the use of any
hand-held device while driving and encourage the use of
voice-operated systems when possible. Make sure you
are aware of all applicable local laws that may affect the
use of electronic devices while driving.
The controls are on the steering wheel.
Page 11 Page 14
Press to go back or to exit a menu
Press to make a selection
Press the up or down buttons to scroll
through the menu items
Press to display the submenus
Status Indicator
Menu items with a check box indicates a
feaure's status. A check in the box indicates the
feature is on, and unchecked indicates the feature is off.
INSTRUMENT CLUSTER DISPLAY MAIN
MENU
Depending on your vehicle options, some menu items
can appear different or not at all.
Note: For your safety, some features are speed
dependent and could be unavailable when your vehicle is
above a certain speed.
Menu Item
Select Screens
Truck Info
Towing
Settings
TRIP COMPUTER
ACCESSING THE TRIP COMPUTER
Using Select Screens
1. Select Select Screens.
2. Use the controls on the steering wheel to navigate the
menu.
Using the Home Screen
Once screens have been added, use the controls on the
steering wheel to view each trip screen.
RESETTING THE TRIP COMPUTER
1. Use the controls on the steering wheel to navigate
the home screen.
2. Select Trip 1 or Trip 2.
3. Press and hold the OK button for a few seconds.
Note: This Trip resets every time you start your vehicle.
PERSONALIZED SETTINGS
CHANGING THE MEASUREMENT UNIT
1. Press Settings on the touchscreen.
2. Press General.
3. Press Measure Units.
4. Select a measurement unit.
CHANGING THE TEMPERATURE UNIT
1. Press Settings on the touchscreen.
2. Press General.
3. Press Temperature Units.
4. Select Fahrenheit or Celsius.
C250 INSTRUMENT CLUSTER
CHANGING THE TIRE PRESSURE UNIT
1. Press Settings on the touchscreen.
2. Press General.
3. Press Tire Pressure Units.
4. Select a pressure unit.
Page 12 Page 15