Morgan Olson C250 Guide De L'opérateur page 3

INSTRUMENT PANEL
1
8
4 5 6 7
Page 4 4 4
Page 1 Page 4 Page 4
2 3
1
GEAR SHIFT
2H Two-Wheel High
The gear shift system features a manual
on-road driving
shift mode. The manual shift mode can
4H Four-Wheel High
be selected by pressing the (M) button
four-wheel drive operation
on the shifter, then using the (+) and (-)
for use in off-road or winter
switches on the shifter lever.
conditions. Not for use on dry
NOTE: Your vehicle must be in drive (D)
pavement.
to activate manual mode.
2
4L Four-Wheel Low
STEERING WHEEL
four-wheel drive with increased
See page 13 for details on adjusting the
torque multiplication. For
steering wheel.
off-road conditions only, such
3
INSTRUMENT CLUSTER as deep sand, steep slopes, or
DISPLAY CONTROLS pulling heavy objects.
Monitor and control important vehicle
information and features through the
instrument cluster display. See page 11
for more details.
12V POWER OUTLET
4
5
FOUR-WHEEL DRIVE
(if equipped)
The four-wheel drive system is designed
to continuously monitor and adjust power
delivery to the front and rear wheels to
optimize traction. The system is designed
to control and prevent wheel slip.
C250 INSTRUMENT PANEL
HEADLIGHTS
6
- Standard for
- Locked
Rotate the control to make a selection.
Note: The lighting control defaults to
- Locked
auto lamps every time you switch your
vehicle on.
Note: Daytime running lamps are activated
when the shift is out of park, regardless of
the headlight selected.
Lamps off.
Parking lamps on.
Auto lamps on.
Headlights on.
7 CURBSIDE FRONT-MOUNTED
SPOTLIGHT
Press the rocker switch to turn the light
on and off. See page 25 for the spotlight
location.
HIGH BEAM HEADLIGHTS
8
Push the lever away from you to
switch the high beam on.
Push the lever forward again or pull the
lever toward you to switch the high beams
off. Slightly pull the lever toward you and
release it to flash the headlights.
Page 2 Page 5