Fein 230V50H Mode D'emploi page 14

en
14
en Translation of the Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Observe the information in the adjacent text!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Gripping surface
Switching on
Switching off
Additional information.
Confirms the conformity of the power tool with the directives of the European
Community.
Confirms the conformity of the power tool with the directives of Great Britain (England,
Wales, Scotland).
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
Low speed
High speed
** May contain numbers and letters
(Ax – Zx) Marking for internal purposes
Character Unit of measurement,
international
P
W
1
P
W
2
U
V
f
Hz
n
/min, min
0
n
/min, min
1R
Unit of measurement,
national
W
W
V
Hz
-1
, rpm, r/min rpm
-1
, rpm, r/min rpm
Explanation
Power input
Output
Rated voltage
Frequency
No-load speed
Load speed (clockwise)