Publicité
Les langues disponibles
Les langues disponibles
6.
Faults and solutions
PROBLEM
The appliance does not start when the
on/off button is pressed.
A bad smell comes out of the
appliance.
The appliance makes a noise.
7.
Taking out of service
1 1
NOTICE!
• Risk of damage to the appliance. Do not place heavy objects on the appliance. This can cause deformations and damage
to the appliance.
If the appliance is stored for a longer period, the following measures must be taken:
1.
Turn the mode dial to 0 to turn the appliance off.
2.
Remove the mains plug from the socket.
3.
Clean the appliance according to the instructions in 5.Cleaning and maintenance.
4.
Pack the appliance in its original packaging or in a plastic bag and put it in a dry place.
8.
Waste disposal
8.1.
Dispose of the appliance as waste
This symbol on the product indicates that this product must not be treated as normal household waste, but should be
collected separately. Return the product to a collection point for recycling waste electrical and electronic equipment
if you live within the EU or in other European countries that have separate collection systems for waste electrical and
electronic equipment. By properly disposing of the product as waste, you help to avoid potential environmental and
public health risks that could otherwise arise from mishandling discarded equipment. Recycling materials contributes
to the conservation of our natural resources.
8.2.
Dispose of the packaging material as waste
Dispose of the packaging material through your local recycling facility. By properly disposing of packaging material and
packaging waste, you help prevent potential risks to the environment and public health. The symbol on the packaging indicates
that the packaging is made of cardboard.
CAUSE
The appliance is not powered.
A fuse has blown in the meter cabinet.
The air inlet is dusty or dirty.
The surface on which the appliance is
placed is not firm, flat or horizontal.
SOLUTION
Check that the plug is in the socket and
that the cable or plug is not damaged.
Check that the RCD is switched on.
Check that there is no power failure.
1.
Remove the appliance's plug
from the socket.
2.
Check the fuses in the meter box.
If the problem persists, contact
Customer Service.
Clean the appliance according to
the instructions in 5.Cleaning and
maintenance.
Move the appliance to a place with a
firm, flat and horizontal surface.
25
Publicité
