3.3.
Installing the appliance
WARNING!
• Electrocution hazard due to short circuit. Do not connect the appliance to the power supply until it is installed as instructed.
1 1
NOTICE!
• Risk of damage to the appliance. Do not pass the power cable under a carpet or cover it with mats, runners and the like.
This can lead to unforeseen heat generation.
1.
Align the two halves of the base crosswise against each other.
2.
Press the studs into the recesses to clip the two halves of the base together.
3.
Gently turn the tower fan upside down.
4.
Align the base with the holes on the tower fan and secure the base with the four screws provided and a screwdriver.
5.
Turn the appliance upright.
4.
Use
4.1.
Important information
Read and follow all the instructions in section 1.Safety.
DANGER!
• Fire hazard. Do not leave the appliance unattended with the plug in the socket.
Select a suitable place for use that satisfies the following points:
• A firm, flat and horizontal surface;
• Near an electrical socket;
• On all sides of the appliance always at least 10 cm free space and away from curtains;
• At least one metre from televisions or radios to prevent electromagnetic interference.
22
FUAVE TF86MB | TF86MW