Agilent Technologies Turbo-V 551 Rack Notice De Mode D'emploi page 199

Installation
The Turbo-V controller is designed for indoor use only and must be powered
WARNING!
with 3-wire power cord (see orderable parts table) and plug (internationally
approved) for user's safety. Use this power cord and plug in conjunction
with a properly grounded power socket to avoid electrical shock and to
satisfy CE requirements. High voltage developed in the controller can
cause severe injury or death. Before servicing the unit, disconnect the
input power cable.
The Turbo-V controller can be used as a bench unit or a rack module, but it must
NOTE
be positioned so that free air can flow through the holes. Do not install or use
the controller in an environment exposed to atmospheric agents (rain, snow,
ice), dust, aggressive gases, or in explosive environments or those with a high
fire risk.
During operation, the following environmental conditions must be
respected:


See the appendix "Technical Information" for detailed Information
about the above mentioned and the other connections, and about the
options installation.
Turbo-V 551 Rack Controller User Manual / 87-901-031-01
temperature: from 0 °C to +45 °C;
relative humidity: 0 – 95 % (without condensation).
Instructions for Use
Installation
(A)
16
199/288