Agilent Technologies Turbo-V 551 Rack Notice De Mode D'emploi page 201

Controls, Indicators and Connectors
Figure 2
The keys function depends on the context (main window,
configuration menu, etc.).
1 Keyboard push-button for START, STOP, RESET mode selection. It is active only when
the front panel operation has been selected. By pressing once the starting phase
begins; if pressed again it stops the pump. If the pump has been stopped automatically
by a fault, this push-button must be pressed once to reset the controller and a second
time to restart the pump.
2 Keyboard push-button to recall on the display the cycle number, cycle time and pump
life and serial number.
3 Keyboard push-button to recall on the display the pump current, pump temperature,
pump power, rotational speed. It is always active, regardless of the selected operating
mode.
4 Keyboard push-button for HIGH/LOW SPEED mode selection. It is active only when the
front panel operation has been selected. Pressed repeatedly, toggles between HIGH
SPEED and LOW SPEED.
5 LCD back-lighted alphanumeric display: dot matrix 4 lines x 16 characters.
Turbo-V 551 Rack Controller User Manual / 87-901-031-01
1
2
Turbo-V 551 Rack
Controller X3501-64001 Front Panel
Instructions for Use
Maintenance
5
3
4
(A)
16
201/288