Parkside PSSFS 3 A2 Instructions D'utilisation Et Consignes De Sécurité page 9

SATELLITE SIGNAL FINDER
˜ Introduction
We congratulate you on the purchase of your new product . You have chosen a high
quality product . The instructions for use are part of the product . They contain important
information concerning safety, use and disposal . Before using the product, please
familiarise yourself with all of the safety information and instructions for use . Only use
the product as described and for the specified applications . If you pass the product on to
anyone else, please ensure that you also pass on all the documentation with it .
˜ Intended use
This satellite signal finder enables you to quickly and easily align satellite systems . Results
are provided via both the display and an acoustic signal . The product is very sensitive
and can pick up even weak signals . Strong input signals (through powerful satellites or
large satellite antennas) can be attenuated using the control knob . The product can be
configured with all types of satellite systems and produces highly accurate readings .
The product is powered through the LNB operating voltage by the receiver/TV or
multi‑switch . An additional power supply is not required .
Any other use or product modification shall be considered improper use and hold
considerable safety hazards . The manufacturer assumes no liability for damages due to
improper use . The product is not intended for commercial use . The product is designed
only for indoor use . Observe the regulations and laws in the country of use .
GB/IE/NI 7