Publicité
Les langues disponibles
Les langues disponibles
▶ Do not leave the product in the sun. Make sure that the product is not heated above the maximum
operating temperature. Protect the product from frost and ammonia.
▶ Use the product in combination with water only. Do not pour chemicals or other liquids into the tank.
▶ Fill the product with clean water only. Foreign matter can cause damage to the pump. Keep the tank free
of sand, drilling slurry and other foreign matter.
▶ Take the influences of the surrounding area into account. Do not use the appliance where there is a risk
of fire or explosion.
▶ Store the product in a secure place when not in use. Products which are not in use must be stored in a
dry, high place or locked away out of reach of children.
Service
▶ Have your product repaired only by qualified, skilled personnel, using only genuine Hilti spare
parts. The safety of the product can thus be maintained.
3
Description
3.1
Product overview
3.2
Intended use
The product described here is a water pressure tank for distributing coolants and flushing liquids on drilling
rigs, concrete saws or angle grinders. Water is generally used for this purpose.
3.3
Possible misuse
This product is not suitable for:
•
Flammable liquids
•
Hydrogen peroxide and similar oxygen emitting media
•
Caustic substances (certain disinfectants and impregnating agents, acids, alkaline solutions)
•
Liquids containing ammonia
•
Solvents and liquids containing solvents
•
Viscous or sticky liquids or those that form residues (paints, grease)
•
Use in food sector
This product may not be used under any circumstances:
•
With external pressure sources
•
For warehousing and storage of liquids
•
As an eye wash
3.4
Items supplied
Tank with pump, hose with connectors, operating instructions
*247636*
1
247636
Tank
@
Filling quantity display
;
Locating pin
=
Pressure gage
%
Safety valve
&
Pump
(
Hose plug-in nipple with ball valve
)
Hose
+
Hose plug-in nipple
§
Drain opening
/
English
9
Publicité
