Publicité
Les langues disponibles
Les langues disponibles
General description
The illustrations are on the
front and back fold-out page.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
-
Cordless Drill
-
8 Screw bits, length 50 mm:
Cross recess:
PH1, PH2, PH3, PZ1, PZ2, PZ3
Recess: SL5, SL6
8 drill bits: 2 mm, 2,5 mm, 3 mm,
-
4 mm, 5 mm, 6 mm, 8 mm, 10 mm
-
Bit extension
-
Storage case
-
Instruction manual
The rechargeable battery and
charger are not included in delivery.
Overview
1 Drill chuck aperture
2 Keyless drill chuck
3 Torque adjustment ring
4 Speed selector
5 Bit holder
6 Button for charge status display
7 Battery Indicator
8 Battery
9 Battery release button
10 LED working light
11 Direction of rotation switch
12 On/off switch
13 Drill bits
14 Screw bits
15 Bit extension
16 Storage case
17 Charger
18 Metal belt clip
Functional description
The cordless drill with two-speed gearing
has a 25+1 level torque adjustment, left/
right running, a removable keyless chuck
and an LED working light. Please refer to
the descriptions below for information on
how the operating elements work.
Technical data
Cordless Drill Set ....... PABS 20-Li E6
Motor voltage U ..........................20 V
Idling speed n
0
1st gear ............................ 0-400 min
2nd gear ......................... 0-1400 min
Maximum torque .......................... 45 Nm
Span-chuck Ø ........................ 1.5-13 mm
Weight (with battery)................... 1.65 kg
Drilling capacity
for wood .......................... max. 30 mm
for steel ........................... max. 13 mm
Protection category........................... IPX0
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Sound pressure level
(L
) ....................72.1 dB(A), K
pA
Sound power level
(L
) ..................83.1 dB(A); K
WA
Vibration (a
)
h
max. ............... <2,5 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
GB
IE
-1
-1
= 5 dB
pA
= 5 dB
WA
2;
K= 1,5 m/s
2
17
Publicité
