Speaker settings
Preparation
Turn on this unit and the equipment you have connected.
While stopped
1 Press [ACTION] or [MENU] to show the initial settings screen.
2
Use the cursor jockey [A, V] to select "7 Speaker Setting" and press
[ENTER].
3 Use the cursor jockey [A, V] to select an item and press [ENTER].
Factory Preset
=
—
eMulti-channel
When you have connected 3 or more speakers.
*2-channel
When you have connected 2 speakers or a
Dolby Pro Logic amplifier.
The initial settings screen is restored if you se-
lect "2-channel".
:
Press RETUAN to exit
4 When you setect "Multi-channel"
The screen shown below appears.
Use the following procedure to adjust the settings for @, © and Q.
1. Use the cursor jockey [A, V, «4, >] to select the item and press [ENTER].
2. Use the cursor jockey [A, V] to change the setting and press [ENTER].
3. Select "Exit" and press [ENTER].
5 Press [RETURN] to complete the settings.
B To return to the previous menu
Press [RETURN].
When set to "Multi-channel"
eif you have used an optical fiber cable to connect this unit
——
digitally to another unit, make the settings on the other unit.
( UEM Mix
eThe setting is shown on the unit's display when a multi-chan-
DN.
Ru
nel disc is being played (= right).
When set to "2-channel"
a
[rj
=
e
A
D
-—
wo
a
dm
=
[^]
P d
=
e
LL
Speaker settings screen for Multi-channel
Q Center
Q Center
© Front (L)
Exit
Test signal
© Surround (L)
© Surround (L)
30 T5897
© Surround
© Front (R)
———— © Subwoofer
© Subwoofer
@ Surround (R)
Q Surround (R)