[®] and [CHG] indicators
This chart shows how these indicators flash under certain conditions.
mm refers to the length of time that the indicator is ON.
[t] indicator
Flashes slowly
eThe unit is on and the LCD is closed or
NENNEN
0
- -
the display mode is set to "4 (off)".
Turn the unit off when you have
]second
finished.
Flashes when you press a button
eThe unit is in hold mode or "LINE-IN" is
BEER
EERE:
on. Release hold mode or press
[IN/OUT] to turn off "LINE-IN",
] second
[CHG] indicator
Flashes slowly
Battery pack charge is low. The unit
EN
EN
.
will turn off after a few minutes.
] second
Flashes
eA problem occurred with the battery
BEHRNNHHEBHEBNBBEB
:
pack. Confirm the display on the unit's
display (= page 44).
| second
The following do not indicate malfunction.
eA sound is heard from the AC adaptor during recharging.
eThe battery pack warms up after recharging or during use.
S
eSmall parts of the LCD turn black or radiate different colors (this is a peculiarity of the
=
LCD).
2
[s mi
Maintenance
£
=
B To clean this unit, wipe with a soft,
B Maintenance of the lens
dry cloth.
elf dust is attached to the lens, remove
If the surfaces are extremely dirty, use a
dust carefully with an air blower for cam-
soft cloth dipped in a soap-and-water solu-
era lenses (optional).
tion or a weak detergent solution.
eBe careful not to touch the lens with your
eUse eyeglass cleaner to remove stubborn
fingers.
dirt from the LCD.
eNever use alcohol, paint thinner or ben-
zine to clean this unit.
eBefore
using chemically
treated
cloth,
read the instructions that came with the
cloth carefully.
RQT5897