Publicité
Les langues disponibles
Les langues disponibles
Preparing the remote
Power supply
This figure shows DVD-LV75.
g=]
e
=
©
—
e
on
c =
FU
c2
Face @ upwards.
B Replacing the button-type battery
The battery normally lasts for about a year.
Replace if the remote control fails to operate the
unit when used within the operation range.
Refer
to
"IMPORTANT
SAFETY INSTRUC-
SIONS" on pages 6 and 7.
"3
/
=
À 2 =f)
Household AC
Operation range
outlet
(AC 120 V, 60 Hz)
The [Ù] indicator lights.
Front of
this unit
Memote cone
Refer to "IMPORTANT SAFETY INSTRUC-
(23 feet) in front
of the signal
The unit is in the standby condition (the
sensor
[05] indicator lights) when the AC adap-
tor is connected. The primary circuit is
always "live" as long as the AC adaptor
is connected to an electrical outlet.
*Do not expose the remote control signal sensor
B When the unit is not going to be used
to bright light.
for a long time
eDo not place obstacles between the remote
The unit consumes
2 W when in standby
control signal sensor and the remote control.
mode.
ED:
not use another unit's remote control at the
To conserve power, disconnect the AC
ROTsgg;
Same time.
adaptor from the AC outlet.
Publicité
