Publicité
Les langues disponibles
Les langues disponibles
wo
+.)
č
D
pu
a
—
CU
CC
Ld
=
e
d
Lu
©
LL.
RQT5897
Troubleshooting Guide
Problem
|...
Solution
Page -
The monitor is dark.
Adjust the brightness.
The picture is disrupted
Some disruption is normal.
during fast forward and
rewind,
No picture on the monitor
| Check connections.
(including video from
Ensure the video input setting is correct.
31
another unit).
eWhile you are playing a disc "LINE-IN" should be off.
While you are viewing video from other equipment "LINE-
IN" should be on.
Select a picture mode other than "4 (Off)".
Ensure the power of the connected equipment is on.
Picture doesn't appear on | Check connections.
il eA terae
:
Check
that the television is
on.
of the picture seems
CER
A9
pre
wrong).
Check that the input mode on the television is correct.
|
|
Check the settings in "5 TV Aspect".
LCD pixels turn black or
| The LCD is constructed with precision technology so 99.99 %
radiate different colors.
of the pixels are active, but of the remaining of 0.01 96, there
are pixels that may be black or emit light constantly.
This phenomenon is not a malfunction.
Displays
NO PLAY
The unit cannot play this disc.
"bAT Er and a number
| "bAT Err 1": A problem has occurred with the battery pack.
appear on the display.
Consult your dealer.
"bAT Err 2": The pack has been recharging for
12 hours but has failed to recharge for some
reason. Recharge again.
"bAT Err 3": The battery pack has overheated during
recharging. Allow the pack to cool down
before recharging again.
Messages do not appear
| Go to the initial settings menu and turn the On-Screen
on the television.
Messages on.
On-Screen Menu Icons
Go to the initial settings menu and change the position of
are cut off or are not
the On-Screen Menu Icons.
displayed at all.
HOO
Trouble has occurred. The number appearing after H
LIC] stands for a number.
| depends on the problem. Turn the unit off and on again.
Alternatively, turn the unit off, disconnect the power source
(AC or battery pack), reconnect the power and turn the unit
on again.
lf the service numbers fail to clear, note the service number
and contact a qualified service person.
Publicité
