Husqvarna CS 2240S II Manuel D'utilisation page 31

Guide bar and saw chain combinations
The following cutting attachments are approved for the models Jonsered CS 2240 II and CS 2240S II.
Length, inch Pitch, inch
13
15
0,325
16
18
Saw chain filing and file gauges
EC Declaration of Conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Jonsered CS 2240 II, CS 2240S II from 2016's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the
COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
- of June 8, 2011 "on the restriction of the use of certain hazardous substances in electrical and electronic equipment"
2011/65/EU.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100:2010, ISO 14982:2009, EN ISO 11681-1:2011, EN 50581:2012.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/09/2131 – CS 2240 II, CS 2240S II.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/161/079.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 30, 2016
Per Gustafsson, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
1155356-38 Rev.4 2018-09-26
TECHNICAL DATA
Guide bar
Gauge, mm Max. nose radius
1,3 10T
Saw chain
Length, drive links
Type
(no.)
56
64
Jonsered H30
66
72
English – 31