HumanTechnik Lisa A-240-90 Mode D'emploi page 16

Function method
The portable RF receiver receives the signals
from various radio transmitters. It converts the-
se signals into vibrating pulses. In addition, 6
event indicator lamps help you to identify the
origin of the signal.
Controls and displays
Event indicator LEDs: The 6 indicator lamps
help you to differentiate between the individual
transmitter signals. They light up for a total of
40 seconds.
Low battery indicator: This LED flashes to indi-
cate that the battery is almost depleted. Please
replace the batteries as soon as possible.
Reset button: When you feel the portable RF
receiver vibrating, you can switch off its vibra-
tion using the reset button on the receiver. The
event indicators light up and go out automati-
cally after a total of 40 seconds.
Furthermore, you can press the reset button to
recall the most recent signal again (the function
works for up to 3 minutes after receiving the
signal).
16 English