Publicité
Les langues disponibles
Les langues disponibles
5.3 Combination button
No.
Icon
Setting the
+
+
date and
clock
connecting
the wireless
function
Press for 3 sec
Child lock
function
Press for 2 sec
Description
1) In the main interface, press
and hold the timer button for 3
seconds to enter the date
setting, press the up/down
button to select the date, press
the confirmation button to
enter the clock setting, press
the up/down button to modify
the time, and press and hold to
accelerate the increase/de-
crease of the time. After
setting the clock, press the
confirm button to return to the
main interface to complete the
setting of date and time.
(2) After 30 seconds from the
last operation of the up/down
button or pressing the return
button or the power on/off
button, you can directly exit the
date and time setting;
3) Setting can be done in both
power-on and power-off state.
1) In the main interface, long
press the on/off key for 3
seconds to enter the AP wireless
network mode, there will be a
wireless icon in the upper right
corner of the line controller. At
this time, enter the APP, select
the category of air water heater,
choose the correct model, and
then network according to the
APP prompts, and after the
network is completed, the
wireless icon will be always on;
(2) Wireless matching can last
up to 8 minutes, after 8 minutes,
if the matching is not successful,
the wireless icon will go out;
3) Long press the delete button
for 8 seconds in the main
interface to reset the wireless
function;
4) It can be set in both power on
and power off state.
NOTE: Please check the 5.4
Using the SmartHome App
for details.
1) In the main interface, long
press the key combination for 2
seconds to enter the child lock
state;
(2) In the state of child lock, long
press the key combination again
for 2 seconds to release the child
lock state;
3) In the locked state, there will
be an icon
next to the water
temperature display.
5.4 Priority schedule
If the booster heater always takes over the
DHW heat load due to setting Priority
schedule to AC, electricity consumption will
be considerably higher. For the months
where space heating/cooling is less important,
it is recommended to set the Priority schedule
to DHW.
If DHW is set as priority and frequent DHW
operation isexpected, there is risk for comfort
problem due to interruption of AC operation.
For the months where space heating/cooling
is more important, it is recommended to set
the Priority schedule to AC.
Air Conditioning or domestic hot water priority
When multiple indoor units are connected to the outdoor unit (refer
to Installer Reference Guide for details), the user can set on the user
interface whether to put DHW or Air Conditioning (A/C) as priority.
This will determine how the outdoor unit will react in case multiple
indoor units requested operation at the same time:
▪ If DHW is set as priority, outdoor unit can decide to operate only for
DHW, while A/C operation is put on hold. In this case, once DHW
operation is finished, outdoor unit can switch to A/C operation.
▪ If A/C is set as priority, outdoor unit can decide to operate only A/
C, in which case booster heater can start for DHW production. Once
A/C operation is finished, outdoor unit can switch to DHW.
To select the Priority schedule
Click
to enter engineering mode and select
1
F13 channel.
Select air conditioning mode priority, F13 set
2
to 0.
Select hot water making mode priority, F13 set
3
to 1.
18
NOTE
Press the
up and down
keys to operate
Press the
up and down
keys to operate
Confirm
Press the
up and down
keys to operate
Confirm
Publicité
