HTW SR24 Manuel De L'utilisateur Et D'installation page 38

2.5 Unit outline dimension (unit: mm)
A
2.6 Installation guidelines
CAUTION
The tank is intended to be installed in an
indoor environment with an ambient
temperature range of 5~43 . The ambient
temperature around the indoor unit must be
≥5 to prevent water form freezing.
In order to effectively fix the water tank,
please make sure that the water tank is
placed on a flat and hard concrete floor.
Please ensure that the water outlet at the
bottom of the water tank has been filled
with water before the water tank.
H
B
Φ504
07
Handling and Installation of water tank
The water tank is soft and heavy, need
more than two people to carry and install,
otherwise it is easy to cause the machine
to ingest and destroy into casualties.
Please carry the water tank according to
the factory state, do not disassemble it by
yourself.
In order to avoid surface abrasion and
deformation, please put a guard on the
surface of the body in contact with hard
objects.
Please ensure the vertical and reliable
installation of the tank and the necessary
space for installation and
maintenance.
Fixing method
WARNING
The appearance of the water tank and
the orientation of the water tank
orifice are for reference only and can
be adjusted according to the actual
installation.
The position of the fixed strip up and
down can be adjusted according to the
actual situation.
The length of the expansion bolt is not
less than 90mm.
Water heater fixing steps are as
follows:
First place the water tank only against the
wall and the ground hard and flat position,
so that the tank vertical ground.
Connect the connection pipes and water
pipes of the internal and external units
according to the installation instructions.
Install the expansion bolts in the wall
according to the drawing.
Fix the end with less holes for mounting
the fixing strip on the expansion bolt.
Tighten the fixing strip to the appropriate
hole position, and then fix it with a screw
on another expansion bolt.
If the fixed strip has extra please cut off.
After the installation is completed, check
whether the water tank is safely and
securely fixed.