Philips HD9860/90 Mode D'emploi page 18

ENGLISH
20
Problem Possible cause
The Airfryer does The appliance is not
not switch on. plugged in.
Several appliances are
connected to one outlet.
I see some Some small spots can
peeling off appear inside the pan of
spots inside my the Airfryer due to the
Airfryer. incidental touching or
scratching of the coating
(e.g. during cleaning with
harsh cleaning tools and/
or while inserting the
basket).
White smoke You are cooking fatty
comes out of the ingredients and the
appliance. fat reducer is not put in
the pan.
The pan still contains
greasy residues from
previous use.
Breading or coating did
not adhere properly to
the food.
Marinade, liquid or meat
juices are splattering
in the rendered fat or
grease
My display This is an error code
shows 5 dashes
as illustrated
in the picture
below.
Solution
When you switch on the appliance,
you hear the sound of the working fan.
If you do not hear this sound, check if
the plug is inserted in the wall outlet
properly.
The Airfryer has a high wattage. Try a
different outlet and check the fuses.
You can prevent damage by lowering
the basket into the pan properly. If you
insert the basket at an angle, its side
may knock against the wall of the pan,
causing small pieces of coating to chip
off. If this occurs, please be informed
that this is not harmful as all materials
used are food-safe.
Carefully pour off any excess oil or fat
from the pan, place the fat reducer in
the pan and then continue cooking.
(Fig. 4)
White smoke is caused by greasy
residues heating up in the pan. Always
clean the pan, basket and fat reducer
thoroughly after every use.
Tiny pieces of airborne breading
can cause white smoke. Firmly press
breading or coating to food to ensure
it sticks.
Pat food dry before placing it in the
basket.
1. Unplug the appliance and let it rest
for 5 minutes before plugging in
again.
2. If your display still show the dashes
please call the Philips service hot line
or contact the Consumer Care Center
in your country.