Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
12
7 Press the Power On/Off button to switch on the appliance. (Fig. 14)
Note
• To start with the Smart Chef programs, refer to chapter "Cooking with Smart Chef
programs".
8 Press the temperature button. (Fig. 15)
» The temperature indication blinks on the screen.
Note
• If you press the timer button first, the appliance will start cooking right after the
cooking time has been confirmed.
9 Turn the QuickControl dial to choose your desired cooking temperature. (Fig. 16)
10 Push the QuickControl dial to confirm the selected temperature. (Fig. 17)
» After the temperature is confirmed, the time indication starts blinking on the
screen.
11 Turn the QuickControl dial to choose your desired cooking time. (Fig. 18)
Note
• If you press the favorite button you will save this cooking temperature and time as
your favorite cooking settings. Any previously saved settings will be overwritten.
For more details, refer to chapter "Save your favorite setting".
• Refer to the food table for manual time/temperature settings for different types of
food.
12 Push the QuickControl dial to confirm the selected time. (Fig. 19)
13 The appliance starts cooking after the cooking time has been confirmed.
Tip
• To pause the cooking process, push the QuickControl dial. To resume the cooking
process, push the QuickControl dial again.
• To change the cooking temperature or time during cooking, repeat steps 8–10.
• To cancel any ongoing process and go back to the main menu, press the return button.
Note
• If you do not set the required cooking time within 30 minutes, the appliance
automatically shuts off for safety reasons.
• If "- -" is selected as the time indication, the appliance goes into preheating mode.
• Some ingredients require shaking or turning halfway through the cooking time
(see 'Food table') (Fig. 20). To shake the ingredients, press the QuickControl dial to
pause cooking, open the drawer and lift the basket out of the pan and shake it over
the sink. Then slide the pan with the basket back into the appliance, and press the
QuickControl dial to resume cooking.
• If you set the timer to half the cooking time, when you hear the timer bell it is
time to shake or turn the ingredients. Be sure to reset the timer to the remaining
cooking time.
Publicité
