Hilti DSH 900-X Mode D'emploi Original page 35

3.1.2 Saw trolley (accessory)
3.2 Intended use
The product described is a gasoline-powered cut-off saw for the wet or dry cutting of asphalt, mineral
construction materials or metals using diamond cut-off wheels or abrasive cut-off wheels. It can be held and
guided by hand or mounted on a saw trolley.
3.3 Recommendations for use
• Use of the wet cutting method is preferable in order to reduce the amount of dust produced when cutting.
By using the self-priming water pump (accessory) you can work without need for a water supply hose.
The water can be drawn, for example, directly from a container.
• Do not cut right through the workpiece in one pass. Move the saw back and forward several times until
it gradually reaches the desired cutting depth.
• To avoid damaging the diamond cut-off wheel when dry cutting, lift the wheel out of the cut for approx.
10 seconds every 30 to 60 seconds while the saw is still running.
• Resharpen a dulled diamond cut-off wheel (i.e. when no diamonds project from the segment matrix) by
cutting with the wheel in a very abrasive material such as sandstone.
• For extensive floor sawing applications, mount the saw on the trolley (accessory).
3.4 Specifications of the cut-off wheels
Diamond cut-off wheels in accordance with EN 13236 are to be used with the product. Synthetic resin-
bonded, fiber-reinforced cut-off wheels in accordance with EN 12413 (straight, not dish-shaped, type 41)
may also be used with the product for working on metals.
The mounting instructions and instructions for use issued by the cut-off wheel manufacturer must be
observed.
3.5 Items supplied
Gasoline-powered saw, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.6 Consumables and wearing parts
• Air filter
• Cord
• Starter
• Fuel filter
• Spark plug
*2271384*
2
@
;
=
%
&
(
)
+
§
2271384
Grip
Throttle trigger
Cutting depth adjustment
Hold-down device
Water tank
Water connection
Axial adjustment
Throttle cable
Machine cradle
English 27