DeWalt DCS572 Traduction De La Notice D'instructions Originale page 41

184 mm CORDLESS CIRCULAR SAW
DCS572
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load speed
Blade diameter
Maximum depth of cut
Blade bore
Bevel angle adjustment
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841-2-5
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
h, W
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
WALT one of the
e
DCS572
V
DC
min
-1
mm
mm
mm
(-XE: 20 mm)
°
kg
dB(A)
dB(A)
dB(A)
= m/s 2
m/s
2
EC-Declaration of Conformity
Machinery Directive
Cordless Circular Saw
DCS572
WALT declares that these products described under Technical Data are in
D
e
18
compliance with: 2006/42/EC, EN62841-1:2015 + A11:2022; EN62841-2-5:2014
1
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more
Li-Ion
information, please contact D
of the manual.
5500
The undersigned is responsible for compilation of the technical file and makes this
184
declaration on behalf of D
58
16
57
Markus Rompel
3.6
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
94
09.08.2023
102
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
3
<2.5
1.5
WALT declares that these products described under Technical Data are in
D
e
compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597 (as amended),
EN62841-1:2015, EN62841-2-5:2014.
These products conform to the following UK Regulations: Electromagnetic
Compatibility Regulations, 2016, S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012, S.I. 2012/3032 (as amended).
For more information, please contact D
the back of the manual.
The undersigned is responsible for compilation of the technical file and makes this
declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
Berkshire, SL1 4DX
United Kingdom
09.08.2023
WALT at the following address or refer to the back
e
WALT.
e
REGULATIONS 2008
Cordless Circular Saw
DCS572
WALT at the following address or refer to
e
WALT.
e
EnGLIsH
39