Publicité
Les langues disponibles
Les langues disponibles
Viewing the Connections
NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection.
See the illustrations above. | To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION cable's WHITE &
RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.| When
receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket.
| When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before
mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module
instruction manual for details of the settings. | Insert the CAM and then the viewing card to the slot that is located in the
terminal cover at the rear side of the TV. The module should be correctly inserted, it is impossible to insert fully if reversed.
The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
English - 40 -
Publicité
