Domo DO990TDK Mode D'emploi page 42

Les langues disponibles

Remove the cover caps from the screw holes of the middle hinge. Unscrew the middle hinge and

place it on the other side. Make sure that the door is aligned both horizontally and vertically so that

the seals are closed on all sides before fully attaching the middle hinge. Replace the cover caps on

the other side.

Carefully put the upper door in place. With the door closed, check that the door is aligned both

horizontally and vertically and that the seals are closed on all sides before fully attaching the top

hinge. Attach the upper hinge and the cover plate.

10. Reposition and adjust the feet to ensure that the appliance is level.

USE

TEMPERATURE CONTROL

The freezer is controlled with a temperature control knob located inside the appliance.

Adjust the control knob as desired to suit your individual preference. There are three

different setting, with MIN being the warmest and MAX the coldest. Position MED is the

recommended position for normal use.

The running time and temperature are affected by where the freezer is located, how often the door is

opened and the temperature of the room the freezer is located in.

When you use the appliance for the first time or after defrosting, adjust the control knob to the coldest

setting for at least 2 hours before introducing food to be stored, and then readjust to the middle

setting.

MOVING THE SHELVES AND DOOR RACK

Empty the fridge before moving the shelves or the door racks.

To move a shelf, raise it and pull it towards you.

To move a door rack, grip it firmly with 2 hands. Raise the door rack and pull it towards you.

DO990TDK