Publicité
Les langues disponibles
Les langues disponibles
3.
Unscrew the pin and pinion from the metal hinge plate and fasten it on the other side.
4.
Unscrew the doorstop on the underside of the door. There is a new doorstop in the accessory pocket.
Place the new doorstop on the other side of the door.
5.
Remove the screws from the bottom hinge with a Phillips screwdriver.
! Attention: the inclination of the refrigerator must be less than 45° so that the compressor oil does not
enter the cooling circuit. If you do shut down the unit completely, wait 24 hours before turning it back on.
6.
There is a doorstop and a Teflon bushing to guide the hinge at the bottom of the door. Move it to the
other side.
z
7.
Replace the lower hinge on the other side and secure it with screws.
www.domo-elektro.be
41
DO990TDK
Publicité
