Power Fist 9175365 Manuel D'utilisation page 6

9175365
8. Never point the air stream or tool at any point of your body, other people
or animals. Debris and dust ejected at high speed can cause an injury.
9. Always turn off the air compressor and drain tank pressure completely
before attempting maintenance or attaching air tools. Release pressure
slowly from the system.
AIR HOSE PRECAUTIONS
1. Inspect the tool's air hose for cracks, fraying or other faults before each
use. Discontinue use if the air hose is damaged or hissing is heard from
the air hose or couplers. Replace the defective air hose.
2. Do not allow people, mobile equipment or vehicles to pass over the
unprotected air hose. Position the air hose away from high traffic areas, in
a reinforced conduit or place planks on both sides of the air hose to create
a protective trench.
3. Prevent damage to the air hose by observing the following:
a. Keep the air hose behind the tool and out of the tool's work path.
b. Keep the air hose away from heat, oil, sharp edges or moving parts.
c. Do not wrap the air hose around the tool as sharp edges may pierce
or crack the air hose. Gently coil the hose and either hang on a hook
or fasten with a device to keep hose together when storing.
4. A damaged or disconnected air hose under pressure may whip around and
inflict personal injury or damage the work area. Secure the compressor's
air hose to a fixed or permanent structure with clamps or cable ties.
5. Install an in-line shutoff valve or regulator to allow immediate control over
the air supply in an emergency, even if a hose is ruptured.
POWER TOOL PRECAUTIONS
1. Do not use any power tool with a malfunctioning trigger, power switch
or control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify the
power tool is operating correctly, before it can be used.
2. Shut the power off and disconnect the abrasive blasting cabinet from
the power supply (if possible) before making any adjustments, cleaning,
servicing or when storing. Such preventive safety measures reduce the
risk of starting the tool accidentally.
www.princessauto.com / 1-800-665-8685
ABRASIVE BLASTING CABINET V1.0
Page 6