Publicité
Les langues disponibles
Les langues disponibles
V1.0
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Problem(s)
Excessive dust in
the cabinet.
Uneven blasting
action.
Inadequate
speed or
inefficiency of
blast.
Static electricity. Dry weather conditions
Page 15
ABRASIVE BLASTING CABINET
Possible Cause(s)
1.
Exhaust plugged or air flow is
blocked.
2.
Abrasive media worn.
3.
Too much abrasive media
inside.
4.
Loose air line or fitting
connections
5.
Dust collection filter full.
1.
Moisture is present inside the
cabinet.
1.
Abrasive media may be worn.
2.
Pressure is too low.
3.
Worn nozzle.
Suggested Solution(s)
1.
Clean rear vent and keep vent away
from any wall.
2.
Replace abrasive media.
3.
Remove excess media.
4.
Tighten fitting and make sure air
lines are secure.
5.
Clean or replace the filter.
1.
Check the air hose to make sure
that there is no moisture in it.
1.
Replace the abrasive media.
2.
Increase the inlet pressure.
3.
Replace the nozzle.
1.
Leave the item being cleaned on
the grating.
2.
Ground the abrasive blasting
cabinet.
www.princessauto.com / 1-800-665-8685
9175365
Publicité
