Krups ESPRESSO AUTOMATIC EA9000 Serie Mode D'emploi page 221

KRUPS
SERIE EA9000
INSTALLING THE CLEANING LIQUID
Press "Now" to confirm or "Later" to do it later.
n
Open the left door (15). Pull the container (19) and screw the bottle (18) onto
n
the container.
Replace the container back with the bottle and close the door.
n
Do not screw in the bottle fully.
n
The bottle must be positioned in line with the drawer.
n
AUTOMATIC STEAM NOZZLE CLEANING PROGRAMME
Your machine will prompt you to start this programme.
n
To do so, press "Now". The cycle will last about 5 minutes and the screen will
n
display the progress of the cleaning.
PREHEATING, AUTOMATIC MAINTENANCE, RINSING
The machine will start by preheating the circuits, then will carry out an
n
automatic test and finally will ask you if the appliance needs to be rinsed or
not.
Place a container under the coffee nozzles and press YES if this is required.
n
The rinsing procedure starts and stops automatically, after around 40 ml have
passed through.
The main drink selection menu is then displayed on the screen.
n
!
Note:
If the first use cycle is interrupted before it has fully completed, you will be asked to save certain
parameters again or to confirm certain settings.
!
Important:
Ensure that all of the lids, covers and doors are closed and that all parts of the machine are
fitted correctly before starting to prepare a drink.
20